I also put a gb SSD in my 2nd pc at the same time and it is also slower than the 40GB it replaced. One is a p55 and the other an x , new good 6gbs cables and indeed tried other cables as well to no avail. Latest windows 7 updates as well as intel RST Both units have 12gb of ram and seperate hitachi 2 tb drives for data and other programs. Agreed and in my case I am connected to the intel 3gbs controller which is faster and more stable than the marvel one in my units.
For instance the windows 7 performance test disk transfer rate shows the x25M to be 7. This has been repeated. The Marvell controller on a M4 is not affected by compressible and non-compressible data.
Most other disk benchmark programs use compressible data, which the SandForce controller excels with. If you check the detailed specs of the , there are two sections, one for compressible data, the other for non-compressible data.
I know many SSD users believe these synthetic benchmark tests are all that matters, but that is not the case. But check it with more sophisticated tests, and custom real world tests, and it can perform equal to or better than many of the latest SSDs. For a great review and comparison, check this review of the , one of many on the Internet.
It will answer many questions for you:. I finally gave up on the in both my pc's, put the x back in pc 1 and got a samsung for pc 2. The SSD provided great performance improvement, but I also noticed something strange - the system would freeze every a few minutes, with no or light access to the SSD.
During the incident, the laptop's HDD indicator was constantly on for up to a minute, and the mouse cursor could sometimes be moved, but clicking on objects was unresponsive. The described symptoms seemed exactly the same as mine, so I followed the instructions to disable the MSI mode in the registry, and rebooted my laptop.
However, the problem persisted. I guess it might need a more suitable driver than the default one provided by Windows 10, but I did not find it on Intel's website.
There might also be some other settings needing tweaking. Could you please advise how to resolve this problem? Many thanks in advance. These measures did seem to reduce the occurrence of the unresponsiveness, but did not completely eliminate it.
The solution was therefore to update it with Intel's corresponding driver. I tried to look into the log file, but was confused by the overwhelming information in it - it appeared to me that it was due to the lack of a certain version of. Could you please advise on the system requirement of this driver? I can certainly provide you with the log file if it helps. The delete is slower, but you get no performance degradation for writes because the pages are already empty, and write performance is generally what you care about.
TRIM only improves performance when you delete files. The last and great tip we want to give you to gain a little extra performance boost is that you should enable AHCI mode. The common question is, is there a solution for this? To answer that question and as we do safely with all modern chipsets there is a way to safely enable AHCI mode.
Here we go:. Now the system needs one more reboot and voilla GeForce Tweet Installation and recommendations On this page we want to share some thoughts on how to increase the lifespan and performance of your SSD.
In short and this is for Vista and Windows 7 : Drive indexing disabled. Otherwise, Windows does not detect the SSD. The drive must be initialized first in the operating system in order to be seen by it and open the wizard. As a reminder, GPT is newer, allowing more partitions and bigger drive sizes for drives that are larger than 2TB of capacity. This avoids problems when cloning the SSD.
Once the disk is initialized, it appears on the disk management screen as shown: You may notice the drive is recognized as unallocated. You must format it in order to use it. Right-click the unallocated sector, and click the New Simple Volume option. Choose the disk space of the volume.
0コメント